Calgary, Alberta

Mechanical Contractor
Services in Calgary

Analog Mechanical delivers full-scope mechanical systems for construction projects across Calgary and Southern Alberta — from multi-family residential to commercial and institutional builds.

COR Certified Red Seal Trades $20M Bonded 75+ Projects Delivered
How We Work

Full-Scope Mechanical Systems

Analog Mechanical operates as a prime mechanical contractor, delivering integrated mechanical scope across construction projects. We self-perform plumbing, gas fitting, and hydronic systems with our own Red Seal journeypersons. HVAC, controls, fire suppression, refrigeration, and insulation are coordinated through our vetted partner network — all under Analog's prime contract and single accountability.

For GCs and developers, this means one company is accountable for the complete mechanical package: from rough-in through commissioning, with no finger-pointing between trades.

Mechanical room installation by Analog Mechanical on a Calgary commercial project
What We Deliver

Our Service Lines

Three trades self-performed in-house. Five additional trades coordinated through our partner network — all under one prime contract.

In-House · Red Seal

Commercial Plumbing

  • Water distribution systems and domestic hot water
  • Sanitary and storm drainage
  • Backflow prevention and pressure systems
  • Multi-family riser systems — suites, common areas, mechanical rooms
  • Tenant improvement plumbing — restaurants, retail, office
  • Gas-fired domestic hot water heater installation

"Our journeyman plumbers carry Red Seal and Master Plumber credentials. No subcontracting, no markup layer — Analog's crew installs it, inspects it, and stands behind it."

In-House · Class A Licensed

Class A Gas Fitting

  • Natural gas distribution and metering
  • Rooftop gas connections for HVAC equipment
  • Commercial kitchen gas systems — restaurants, cafeterias
  • Gas-fired boilers and mechanical equipment connections
  • Building gas pressure testing and commissioning

"Class A gas fitting in Alberta is a licensed trade. Our fitters hold the credentials — and the liability — for every gas system we install."

In-House · Hydronic Specialists

Hydronic Heating Systems

  • Hot water boiler systems — condensing and non-condensing
  • Radiant floor and panel heating
  • Multi-zone heating systems
  • Expansion tanks, pumps, manifolds, controls
  • High-efficiency boiler replacement and retrofit

"Hydronics done right means consistent comfort, lower operating costs, and a system that performs for decades. Our team has the depth to design and install — not just hook up equipment."

Coordinated Partner Network

HVAC Systems

  • Rooftop unit installation and replacement
  • Split systems and VRF/VRV systems
  • Commercial ventilation and air handling
  • Heat pumps and energy recovery ventilators
  • Exhaust systems and make-up air units

"HVAC is coordinated through Analog's vetted partner network under our prime contract. You deal with one company — we handle coordination, quality, and schedule accountability."

Coordinated Partner Network

Building Automation & Controls

  • DDC (Direct Digital Controls) systems
  • Building automation system (BAS) integration
  • Energy management and monitoring
  • Mechanical equipment controls and sequencing
  • System commissioning and optimization

"Controls are coordinated through specialists under Analog's prime contract, with full integration with the mechanical systems our team installs."

Coordinated Partner Network

Fire Suppression

  • Wet, dry, and pre-action sprinkler systems
  • Standpipe systems
  • Alberta Building Code compliance
  • Coordination with architectural and structural trades

"Fire suppression is handled by licensed specialists within our coordinated partner network — accountable to Analog, integrated with the full mechanical scope."

Coordinated Partner Network

Refrigeration

  • Commercial refrigeration systems — walk-in coolers and freezers
  • Display case and reach-in refrigeration for food service
  • Process cooling and industrial refrigeration
  • Refrigerant piping and system commissioning

"Commercial refrigeration is coordinated through our partner network under Analog's prime contract — qualified specialists, managed schedule, single accountability."

Coordinated Partner Network

Mechanical Insulation

  • Pipe insulation — hot, chilled, and domestic water systems
  • Duct insulation and vapour barrier systems
  • Equipment and vessel insulation
  • Condensation control and energy efficiency compliance

"Insulation is coordinated through our partner network, sequenced with Analog's in-house plumbing and hydronic work to keep mechanical milestones on track."

Design-Build Delivery

Full Design-Build Mechanical

For owners and developers who want a single point of accountability from concept through commissioning, Analog offers design-build mechanical delivery. We work directly with your design team or independently under a design-build contract — developing the mechanical design, coordinating engineer-of-record stamping, and delivering the full installed scope under one agreement.

Design-build mechanical removes the gap between specification and execution. Analog's field experience informs the design, reducing RFIs, minimising change orders, and compressing schedule.

  • Mechanical design developed alongside construction planning — no hand-off friction
  • Coordination with structural, architectural, and electrical from day one
  • Budget certainty earlier in the project lifecycle
  • Single contract for design and construction — one warranty, one point of accountability
Our Delivery Model

One Contract. One Team. Full Accountability.

Most mechanical scopes are broken across multiple subcontractors — a plumbing sub, an HVAC sub, a fire suppression sub — each with their own scheduling, markup layers, and liability positions. When things go wrong, the GC manages the conflict.

Analog operates differently. We hold the prime mechanical contract and coordinate the complete mechanical scope — self-performing what our Red Seal trades cover, and managing specialty coordination under our contract.

  • Single point of contact for all mechanical One number to call. One company accountable from rough-in to commissioning.
  • Integrated scheduling across all mechanical trades One schedule, coordinated internally — no gaps between plumbing, HVAC, and controls.
  • Coordinated submittal packages All mechanical submittals packaged and tracked through Analog — not piecemeal from multiple subs.
  • One COR-certified safety program across site Analog's externally audited COR program applies to our crew and is reflected in partner requirements.
  • Clean scope handoffs — no gaps, no overlap Scope boundaries are documented and enforced. No trades fighting over who owns what.
  • 24-hour prequalification response Bonding, COR, Red Seal credentials, and insurance — packaged and sent within one business day.
Project Experience

Sectors We Serve

Analog delivers mechanical scope across a range of building types — from rental towers to institutional projects.

Multi-Family Residential

Apartment towers, condo developments, and mixed-use residential — full mechanical scope from underground rough-in through suite connections and mechanical room commissioning.

Commercial Tenant Improvements

Retail, restaurant, office, and fitness tenant build-outs — mechanical upgrades, plumbing modifications, and gas system installations for occupied commercial buildings.

Base Building Construction

Commercial and institutional new builds — full mechanical package from design through commissioning as prime mechanical contractor, coordinating all trades under one contract.

Healthcare & Medical Facilities

Medical office buildings and specialized facilities — plumbing systems for clinical environments, medical gas coordination, and compliance with Alberta Health guidelines.

Hospitality & Restaurant

Commercial kitchen gas systems, grease interceptors, hood exhaust, make-up air, and plumbing for restaurants, cafeterias, hotels, and food service operations across Calgary.

Institutional & Public Sector

City of Calgary prequalified — Category C7400200: Buildings Mechanical Contractor. Experienced with public sector procurement requirements, documentation standards, and safety compliance.

Credentials

Credentials That Matter to GCs

Analog's prequalification package is in order before you ask. Here's what's on file.

COR Certified

Certificate of Recognition — independently audited by ACSA (Alberta Construction Safety Association). Analog's safety program is verified through annual third-party audits.

Red Seal Journeypersons

In-house Red Seal credentials across all self-performed trades: Plumber (Interprovincial), Gasfitter Class A. Master Plumber — Province of Alberta.

Gold Seal Project Management

Hans Acht, co-founder — Gold Seal certified project manager through the Canadian Construction Association (CCA). 25+ years senior estimating and project management experience.

$20M Bonding Capacity

Qualified for large-scope commercial and institutional mechanical contracts. Bonding confirmation and capacity letter available on request within 24 hours.

BBB A+ Rating

Better Business Bureau accredited. A+ rating reflecting Analog's commitment to transparency, professional conduct, and resolution of any issues raised through formal complaint processes.

MCA Alberta Member

Member of the Mechanical Contractors Association of Alberta — the provincial trade association representing the mechanical contracting industry in standards, advocacy, and best practices.

City of Calgary Prequalified

Formally prequalified by the City of Calgary — Category C7400200: Buildings Mechanical Contractor. Qualified for municipal projects and public sector competitive bids in Calgary.

Common Questions

Frequently Asked Questions

A prime mechanical contractor holds the mechanical contract directly with the GC or owner, coordinating and delivering the full mechanical scope — including plumbing, gas, HVAC, controls, and fire suppression — as an integrated package. Analog Mechanical operates as prime on all projects we take on.
We self-perform commercial plumbing, Class A gas fitting, and hydronic heating with our own Red Seal journeypersons. HVAC, building automation controls, fire suppression, refrigeration, and insulation are coordinated through our vetted partner network under our prime contract.
Analog delivers mechanical scope from $50,000 tenant improvements to $7.6M+ multi-family developments. Our bonding capacity is $20M per project, and we are prequalified by the City of Calgary.
Yes. Analog Mechanical holds full COR (Certificate of Recognition) certification through the Alberta Construction Safety Association (ACSA). Our safety program is externally audited annually.
Within 24 hours for standard prequalification requests. The package includes COR certification, bonding confirmation, Red Seal and Master Plumber credentials, WCB clearance, insurance certificates, and project references.

Ready to Talk Scope?

Send us your project details — drawings, spec sections, or a general scope description. We'll respond within 24 hours with a qualified mechanical budget and a clear path to execution.

Request an Estimate 403.475.8889